Reddy Mechanical Solutions Pty Ltd
ABN: 13 651 354 871
Address: 18 Dickens Place, Armadale WA 6112
Email: admin@reddymechanical.com
Phone: 08 7665 8038
Last updated: August 2026
At Reddy Mechanical Solutions Pty Ltd (“RMS”, “we”, “us” or “our”), we supply industrial, commercial vehicle, tail lift, loading dock, hydraulic, electrical and mechanical parts.
We stand behind the products we supply. At the same time, many of our products are technical components that must be correctly identified, installed, adjusted and used. This policy explains when products may be returned, how warranty claims are assessed and the responsibilities of both RMS and the purchaser.
Nothing in this policy excludes, restricts or modifies any rights or remedies that cannot lawfully be excluded under the Australian Consumer Law (ACL).
1. Australian Consumer Law
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
These rights apply in addition to any warranty provided by RMS or the product manufacturer.
RETURNS
2. Change-of-Mind and Incorrectly Ordered Parts
RMS is not required to provide a refund or exchange where you:
- change your mind;
- no longer require the product;
- find the product cheaper elsewhere;
- incorrectly identify or order a part;
- order an incorrect quantity; or
- incorrectly determine that a product is suitable for your application.
However, at our discretion, RMS may accept an eligible product for return within 30 days of delivery.
To be considered for a change-of-mind or incorrectly ordered return, the product must:
- be unused and uninstalled;
- be in new and resaleable condition;
- be complete with all components, accessories and documentation;
- be returned in its original packaging where reasonably possible;
- not have been damaged, marked, modified or contaminated; and
- be accompanied by proof of purchase.
Approval must be obtained from RMS before returning the product.
Acceptance of a return is not guaranteed merely because the product has been sent back to us.
Restocking Fee
Approved change-of-mind or incorrectly ordered returns may be subject to a 15% restocking fee to cover inspection, administration, repackaging and handling costs.
Where our supplier or manufacturer charges RMS a higher restocking or return fee for a special item, the applicable supplier charge may instead be deducted from the refund, provided this is advised to you before the return is accepted.
Original freight charges are generally non-refundable for change-of-mind or incorrectly ordered returns.
Return freight is the purchaser’s responsibility unless otherwise agreed by RMS.
3. Products That Cannot Normally Be Returned for Change of Mind
Unless required by Australian Consumer Law, we generally cannot accept change-of-mind returns for:
- electrical or electronic components that have been installed, connected or energised;
- hydraulic components that have been installed, filled with fluid or operated;
- seals, seal kits, hoses or components that have been opened and may have been contaminated;
- custom-made or specially manufactured products;
- special-order or non-stock products ordered specifically for the customer;
- products modified to the customer’s requirements;
- cut-to-length products;
- clearance products expressly sold as final-sale items;
- products that have been installed or used;
- products damaged after delivery;
- products missing components or accessories; or
- products that cannot reasonably be resold as new.
This section relates to change-of-mind returns only and does not limit your rights regarding faulty products under the Australian Consumer Law.
CORRECT PART IDENTIFICATION
4. Customer Responsibility
Many products supplied by RMS are application-specific.
Where you select a product without requesting RMS to confirm compatibility, you are responsible for confirming that the product is suitable for your equipment before ordering and installation.
We strongly recommend providing information such as:
- equipment make and model;
- tail lift make and model;
- serial number;
- existing part number;
- clear photographs;
- measurements;
- voltage;
- hydraulic specifications; and
- any other information requested by RMS.
If RMS recommends a particular product based on information supplied by you, the accuracy and completeness of that information is important.
RMS is not responsible for an incorrect product being supplied where the incorrect selection resulted from inaccurate, incomplete or misleading information provided by the purchaser, subject always to any rights that cannot be excluded under Australian Consumer Law.
If you are unsure whether a part is correct, contact RMS before installing it.
WARRANTY
5. RMS Parts Warranty
Unless a different warranty period is stated on the product page, quotation, invoice or supplied manufacturer documentation, RMS provides a 12-month warranty against defects from the date of supply on new parts supplied by RMS.
Where a manufacturer’s warranty applies, RMS may assist with processing the warranty claim with the manufacturer.
Our warranty is additional to, and does not replace, any rights or remedies available under Australian Consumer Law.
6. What Our Warranty Covers
Subject to this policy and Australian Consumer Law, our warranty covers defects in materials or manufacture that arise during normal and appropriate use of the product.
Where a valid warranty claim is accepted, RMS will provide the remedy required by law and, where the law permits RMS to determine the remedy, may elect to:
- repair the product;
- replace the product;
- supply an equivalent product;
- provide replacement components; or
- provide a refund or credit.
The appropriate remedy will depend on the circumstances and the nature of the failure.
7. Warranty Exclusions
To the extent permitted by law, our voluntary warranty does not cover failures or damage caused by:
- incorrect installation;
- installation contrary to manufacturer instructions;
- incorrect wiring;
- incorrect voltage or polarity;
- incorrect hydraulic pressure or flow;
- contaminated hydraulic systems;
- dirty or unsuitable hydraulic fluid;
- water ingress caused by improper installation or damaged connectors/seals;
- incorrect adjustment;
- misuse, abuse or neglect;
- overloading;
- impact, collision or external damage;
- operation outside the product’s intended specifications;
- unauthorised modification;
- disassembly or attempted repair without approval;
- incorrect maintenance;
- failure to carry out required maintenance;
- normal wear and tear;
- corrosion caused by environmental conditions or inadequate maintenance;
- damage caused by another defective component;
- incorrect diagnosis of the original equipment fault;
- use in an application for which the product was not designed; or
- continued operation after a fault becomes apparent where doing so causes further damage.
A failed component does not automatically establish that the component was defective when supplied. RMS may inspect and test the product and consider the installation and operating conditions before determining the cause of failure.
These exclusions do not apply where doing so would exclude or restrict a right that cannot legally be excluded.
WARRANTY CLAIM PROCESS
8. Before Removing or Replacing a Suspected Faulty Part
Where reasonably practicable, please contact RMS before replacing, dismantling or disposing of a suspected faulty component.
This gives us the opportunity to assist with diagnosis and may prevent unnecessary replacement of a functioning component.
Unless immediate action is reasonably required for safety or to prevent further damage, do not dismantle, modify or attempt to repair a suspected warranty item without first contacting RMS.
9. Making a Warranty Claim
To submit a warranty claim, please provide:
- your RMS invoice or order number;
- product/part number;
- equipment make and model;
- equipment serial number where applicable;
- date of installation;
- a clear description of the fault;
- photographs of the product and installation;
- photographs of any visible damage;
- video of the fault occurring where practical;
- relevant voltage, pressure or diagnostic readings where applicable; and
- installer details if requested.
We may request additional information where reasonably necessary to diagnose the failure.
Claims should be sent to:
Reddy Mechanical Solutions Pty Ltd
18 Dickens Place
Armadale WA 6112
Email: [insert warranty email]
Phone: [insert phone]
10. Product Inspection and Testing
RMS may require a product to be returned for inspection or testing before determining the appropriate remedy.
The existence of a fault does not necessarily mean that the product itself caused the fault.
Testing may determine that a problem was caused by matters such as:
- another component;
- incorrect wiring;
- incorrect hydraulic pressure;
- contamination;
- incorrect installation;
- external damage; or
- operating conditions.
Where a returned product is found not to be defective and Australian Consumer Law does not otherwise require RMS to bear the relevant costs, RMS may charge reasonable testing, inspection and return freight costs, provided these costs are disclosed to the customer before being incurred.
11. Do Not Dispose of Warranty Parts
Unless RMS gives written approval, a product that is the subject of a warranty claim must not be discarded or destroyed before RMS has had a reasonable opportunity to inspect it.
Where inspection is reasonably required to determine the claim, failure to make the product available may prevent RMS from determining whether the voluntary warranty applies.
This does not limit any rights available under Australian Consumer Law.
LABOUR, FREIGHT AND OTHER COSTS
12. Labour and Installation Costs
Do not engage third-party repairers or incur labour costs on the assumption that RMS will reimburse those costs without first contacting us, except where immediate action is reasonably necessary.
RMS does not automatically agree to reimburse:
- removal labour;
- installation labour;
- diagnosis;
- travel;
- towing;
- vehicle downtime;
- third-party call-out fees;
- accommodation;
- hire equipment; or
- other consequential costs.
Where Australian Consumer Law requires RMS to compensate a customer for reasonably foreseeable loss or damage, those statutory rights will apply.
For claims under RMS’s voluntary warranty that go beyond ACL entitlements, any reimbursement of labour or other expenses must be approved by RMS in writing before the cost is incurred.
13. Freight for Faulty Products
If RMS confirms that a product is faulty and RMS is responsible for the remedy, RMS will meet reasonable return or redelivery costs where required by Australian Consumer Law.
For large, heavy or difficult-to-transport products, please contact us before arranging transport so we can determine an appropriate collection or inspection method.
Do not send products freight collect without prior approval.
For change-of-mind or incorrectly ordered returns, freight costs are generally the customer’s responsibility.
RETURNS PROCEDURE
14. Return Authorisation
Before returning any product, contact RMS and request a Return Authorisation.
Please include:
- your name/company;
- order or invoice number;
- part number;
- reason for return;
- photographs where applicable; and
- whether the product has been installed or used.
Once approved, we will provide return instructions.
Unauthorised returns may be held while we identify the order and reason for return and may be returned to the sender where the return is not accepted.
15. Packaging Returned Products
Customers must take reasonable care when packaging products for return.
Where the customer is responsible for return freight, RMS is not responsible for damage caused by inadequate packaging or damage occurring during return transport.
Where possible, protect:
- electrical connectors;
- hydraulic ports;
- machined surfaces;
- threads;
- seals;
- sensors; and
- fragile components.
Hydraulic components should have ports securely capped or plugged to prevent leakage and contamination.
REFUNDS
16. Refund Method
Where a refund is approved, it will generally be processed to the original payment method where practicable.
Approved refunds will be processed within a reasonable period after the return has been assessed.
For change-of-mind returns, applicable restocking fees, supplier charges or freight charges may be deducted from the refund as described in this policy.
No deduction will be made where doing so would be inconsistent with your rights under Australian Consumer Law.
17. Major and Minor Failures
Your rights for a faulty product depend on the nature of the failure.
For a major failure, Australian Consumer Law may entitle you to reject the goods and choose a refund or replacement, as well as compensation for reasonably foreseeable loss or damage where applicable.
For a failure that is not major, RMS is generally entitled to provide an appropriate remedy within a reasonable time, such as repairing the product.
Nothing in this policy limits those rights.
SPECIAL ORDERS
18. Special-Order and Custom Products
Products ordered specifically for a customer, imported on request, custom manufactured, modified or otherwise not normally stocked by RMS generally cannot be cancelled or returned simply because the customer changes their mind.
Where RMS has already committed to purchasing or manufacturing a special-order product, cancellation may not be possible.
We recommend carefully checking all specifications before approving a special order.
This does not affect rights relating to faulty goods, products that do not match their description or other rights under Australian Consumer Law.
INSTALLATION
19. Professional Installation
Many RMS products are intended for installation by suitably qualified and experienced technicians.
Electrical, hydraulic, structural and safety-related components should only be installed by persons with appropriate skills, experience and qualifications for the work being performed.
Where installation, commissioning, adjustment or programming is required, all relevant manufacturer instructions and equipment specifications must be followed.
Incorrect installation may:
- damage the new component;
- damage other equipment;
- create a safety hazard; and
- affect eligibility under our voluntary warranty where the installation caused or contributed to the failure.
GENERAL
20. Proof of Purchase
Proof of purchase is required so we can verify the product, purchase date and transaction.
Acceptable proof may include:
- RMS tax invoice;
- RMS order confirmation;
- account transaction record; or
- other reasonable evidence showing the purchase was made from RMS.
21. Products Purchased Through Another Supplier
This policy applies to products purchased directly from Reddy Mechanical Solutions Pty Ltd.
If an RMS-branded or supplied product was purchased through another distributor or reseller, you should generally contact the seller from whom you purchased it in the first instance.
22. Assessment Does Not Automatically Mean Approval
Issuing a return authorisation, accepting a returned product or inspecting a product does not itself constitute acceptance of a warranty claim.
The claim is accepted once RMS has assessed the circumstances and confirmed the applicable remedy.
23. Fraudulent or Misleading Claims
RMS reserves the right to reject claims under its voluntary warranty where there is evidence of fraud, deliberate misrepresentation, product substitution, tampering or falsification of purchase or installation information.
This does not limit any statutory rights that apply.
Product serial numbers, identification labels and other identifying information should not be removed or altered.
24. Business and Trade Customers
RMS supplies many products to businesses and trade customers.
The application of Australian Consumer Law depends on the circumstances of each transaction. Nothing in this policy excludes rights that apply to a business customer under Australian Consumer Law.
For transactions where statutory consumer guarantees do not apply, the applicable RMS quotation, account terms, invoice terms and express warranty conditions will govern the transaction.
25. Policy Updates
RMS may update this policy from time to time.
The policy applicable to a transaction will generally be the version in effect at the time of purchase, subject always to applicable law.
Need Help Identifying a Part?
If you are unsure which part you need, contact us before ordering.
Send us your equipment make, model, serial number, existing part number and clear photographs and our team will assist with identifying the correct component.
Correct identification before ordering can save considerable time, freight and downtime.
Reddy Mechanical Solutions Pty Ltd
18 Dickens Place, Armadale WA 6112
(08) 7665 8038
admin@reddymechanical.com